Module GM ACDelco Petrol Gen2 CAN
![SW identification](/images/is_id.png)
![Read SW from ECU](/images/is_r.png)
![Write SW to ECU](/images/is_w.png)
![Automatic checksum calculation](/images/is_cs.png)
FIDs: 128, 129, 167, 168, 176, 231
Module for reading and writing through OBD2 by CAN-bus ACDelco Gen2 ECUs used in petrol GM vehicles.
GM ACDelco E39A Gen2 (FID: 129)
ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
GM ACDelco E78 Gen2 (FID: 231)
ECU is based on MCU Motorola MPC5566 with internal flash memory 3.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
GM ACDelco E80 Gen2 (FID: 176)
ECU is based on MCU NXP MPC5676 with internal flash memory 6.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
GM ACDelco E82 Gen2 (FID: 168)
ECU is based on MCU NXP SPC5676 with internal flash memory 6.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
GM ACDelco E84 Gen2 (FID: 167)
ECU is based on MCU NXP SPC5676 with internal flash memory 6.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
GM ACDelco E92 Gen2 (FID: 128)
ECU is based on MCU NXP SPC5674 with internal flash memory 4.0Mb.
Allows to read fullflash and write calibration area through CAN-bus with checksumm correction on writing.
New ECU types will be added as soon as possible!
Module requires security USB dongle