Module SsangYong Delphi Diesel

FID: 32, 33, 34, 87

Module for OBD reading and writing Delphi ECUs used in SsangYong diesel vehicles.

SsangYong Delphi DCM6.2AP (FID: 32)

ECU based on MCU NXP SPC5673 with internal memory 3Mb.

Allows to read and write calibration area via CAN-bus with CHK calculation. Recovery is possible from any state.

Supported vehicles:
SsangYong Tivoli/XLV D16DTF
SsangYong Rodius/Stavic II D22DTR
SsangYong Korando C/New Actyon D22DTF
SsangYong Rexton G4 D22DTR

SsangYong Delphi DCM6.2AP-6D (FID: 87)

ECU based on MCU NXP SPC5674 with internal memory 4Mb.

Allows to read and write calibration area via CAN-bus with CHK calculation. Recovery is possible from any state.

Supported vehicles:
SsangYong Rexton G4 D22DTR-SCR

SsangYong Delphi DCM3.7AP (FID: 33)

ECU based on MCU Renesas SH72513 with internal memory 2Mb.

Allows to read FullFlash and write calibration area via CAN-bus with CHK calculation.

Supported vehicles:
SsangYong Actyon Sports D20DTR
SsangYong Korando C/New Actyon D20DTF
SsangYong Rexton D20DTR
SsangYong Rodius D20DTR
SsangYong Stavic II D20DTR

SsangYong Delphi DCM3.2AP (FID: 35)

ECU based on MCU Motorola MPC563 +external flash AM29BDD160GB with total memory adress area 2.5Mb.

Allows to read FullFlash, write with CHK calculation by K-line.

Supported vehicles:
SsangYong Actyon D20DT Euro4
SsangYong Actyon Sports D20DT Euro4
SsangYong Kyron D20DT Euro4
SsangYong Kyron D27DT Euro4
SsangYong Rexton D20DT Euro4
SsangYong Rexton D27DT Euro4
SsangYong Rodius D27DT Euro4

SsangYong Delphi DCM3.1 (FID: 34)

ECU based on MCU Motorola MPC555 with internal memory 448Kb.

Allows to read FullFlash and write calibration area via K-line with CHK calculation.

Supported vehicles:
SsangYong Actyon D20DT Euro3
SsangYong Actyon Sports D20DT Euro3
SsangYong Kyron D20DT Euro3
SsangYong Kyron D27DT Euro3
SsangYong Rodius D27DT Euro3
Tata Safari 3.0 DiCOR
Tata Xenon 3.0 DiCOR